Industrial Level Switches and Point Level Sensors

Industrial level switch for point detection of the presence or absence of material in liquids, bulk solids and leak containment systems. With discrete relay or transistor outputs, it operates from -40 °C to 200 °C and at pressures from vacuum to 40 bar, offering high reliability in the presence of dust, foam or buildup.

About this category

Industrial Level Switches and Point Level Sensors

Level switches (or point level switches) are essential safety and control devices in any industrial setup. Unlike continuous transmitters, these devices are designed specifically to detect the presence or absence of material at a predetermined critical point in the line or tank. On reaching that limit, they switch a discrete (ON/OFF) signal that immediately triggers safety alarms, emergency stops or automated fill and drain cycles.


Operating Principle and Technologies

To offer maximum operational versatility across the different physical properties of the media, this family of instruments can be configured under several detection principles:

  • Mechanical and Float Principles: Ideal for direct, reliable detection in clean or utility liquids.
  • Vibrating Principles (Forks / Tuning Forks): Highly effective in both liquids and bulk solids, offering total immunity to foam, turbulence or ambient dust buildup.
  • Optical Principles: Designed for ultra-fast switching response, commonly applied in selective phase detection or critical containment systems.

Its advanced engineering allows the instrument to ignore critical factors such as residual product buildup on the sensor, dense dust clouds in the surrounding environment or thick layers of surface foam.


Technical Specifications and Process Limits

Mechanical and Detection Capabilities

  • Measurement Type: Fixed point detection (configurable as a high-level alarm, low-level alarm or presence sensor).
  • Reach and Length: Models with customizable insertion length or mechanical reach of up to 20 meters or more depending on the technology design.
  • Density Sensitivity: Ability to detect media with a minimum density from 0.5 g/cm³.

Operating Conditions

  • Process Temperature: Wide working temperature range from $-40^\circ\text{C}$ to $200^\circ\text{C}$.
  • Process Pressure: Designed to withstand from absolute vacuum up to 40 bar of hydromechanical pressure.

Electrical Data and Integration

  • Discrete Control Outputs: Configurations available with dry contact (relay) for high power or solid-state transistor (NPN/PNP) outputs for fast integration.
  • Power Supply: Instrument families adapted for 10-30 Vdc ranges in low-voltage control loops, or 100-240 Vac for general power networks.
  • Field Indication: Modules fitted with high-brightness local LED indicators to verify switching status directly in the plant.

Construction Materials and Protection

Available Materials

  • Wetted Areas: Standard construction in highly chemical-resistant stainless steels (SUS304, SUS316 and SUS316L).
  • Aggressive Media: A range of advanced engineering polymers and special protective coatings to withstand corrosive agents or highly adhesive fluids.

Environmental Certifications

  • Ingress Protection: Enclosures certified to IP65, IP66, IP67 and IP68 protection ratings.
  • External Mechanical Resistance: Enclosures per NEMA 4 and NEMA 4X standards against water jets and outdoor corrosion.
  • Intrinsic Safety: Options with Ex d explosion-proof and Ex ia intrinsic safety certifications for operation in hazardous areas with a risk of flammable gases or dust.

Typical Industrial Applications

  1. Critical Safety Alarms: Point monitoring of maximum and minimum levels in storage tanks, recirculation tanks and sumps to prevent accidental overflows.
  2. Hydraulic Pump Protection: Digital low-level interlock to actively prevent dry-running and cavitation in process pumps and impellers.
  3. Hopper and Solids Silo Control: Automated management of filling and discharge of industrial powders, grains and granular materials of varying density.
  4. Loading and Transfer Lines: Detection of actual material presence in discharge pipes or pneumatic or hydraulic conveying lines.
  5. Leak Detection: Safety sensing in drip trays, chemical spill containment bunds and double-wall systems in critical fuel tanks.

There are no products available in this category yet.

View the full catalog