RTD vs Thermocouple: Technical Differences and How to Choose the Right Sensor for Your Process

· Leonel

Technical comparison of RTDs (PT100/PT1000) and thermocouples for industrial temperature measurement. Ranges, accuracy, response time and selection criteria by application.

RTD vs Thermocouple: Technical Differences and How to Choose the Right Sensor for Your Process

RTD vs Thermocouple: Technical Differences and How to Choose the Right Sensor for Your Process

Temperature measurement is one of the most common variables in industrial processes and, at the same time, one of those that causes the most confusion when specifying the right sensor. RTD or thermocouple is not a matter of preference — it is a technical decision that depends on process conditions.

What is an RTD

An RTD (Resistance Temperature Detector) is a sensor that measures temperature by exploiting the change in a metal's electrical resistance with temperature. The most widely used in industry is the PT100 (platinum, 100 Ω at 0°C) and the PT1000 (platinum, 1000 Ω at 0°C).

Typical operating range: −200°C to +850°C (with practical limitations depending on the model)
Typical accuracy: ±0.1°C to ±0.5°C depending on the class (A, B or AA)

What is a thermocouple

A thermocouple is a pair of dissimilar conductors joined at one end (the measuring junction). The temperature difference between the measuring junction and the reference junction generates a voltage (Seebeck effect) that is converted into temperature.

The most common types in industry are:

Type Materials Range Typical use
J Iron / Constantan −40 to +750°C General industry
K Chromel / Alumel −200 to +1250°C High temperature, furnaces
T Copper / Constantan −200 to +350°C Cryogenics, food
E Chromel / Constantan −40 to +900°C High sensitivity
S / R Platinum / Rhodium up to +1600°C Steelmaking, glass

Direct technical comparison

Parameter RTD (PT100) Type K thermocouple
Range −200 to +600°C −200 to +1250°C
Accuracy High (±0.1–0.5°C) Moderate (±1–2°C)
Long-term stability High Moderate (drifts over time)
Response time Slower Faster
Mechanical robustness Lower Higher
Cost Higher Lower
Requires cold junction compensation No Yes
Self-generated signal No (requires current) Yes (Seebeck effect)

When to use each one

Choose an RTD when:

  • You need high accuracy and repeatability (process control, laboratory, pharmaceutical)
  • Temperature does not stably exceed 600°C
  • Long-term stability is critical (the PT100 does not drift significantly)
  • The process requires measurements that will be compared or certified

Choose a thermocouple when:

  • Temperature exceeds 600°C (furnaces, combustion processes, foundry)
  • You need very fast response times
  • The environment has vibration or severe mechanical conditions
  • Sensor cost is a limiting factor and moderate accuracy is acceptable
  • Measurement is required at hard-to-reach points or complex geometries

The role of the transmitter

In industrial applications, both RTDs and thermocouples are usually connected to a temperature transmitter that converts the sensor signal into a standard 4-20 mA signal (or HART, Foundation Fieldbus, etc.) to carry it to the control system.

The transmitter performs three key functions:

  1. Conditions and linearizes the sensor signal
  2. Electrically isolates the current loop from the sensor
  3. In the case of thermocouples, performs cold junction compensation internally

The sensor + transmitter combination allows the transmitter to be installed in the field (head-mounted or DIN rail) and the 4-20 mA signal to be carried over long distances with no loss of accuracy, unlike running the sensor's raw signal (especially critical with thermocouples, whose extension wires must be of the same material).

Thermowells: not an optional element

In most industrial installations, temperature sensors are installed inside a thermowell. The well protects the sensor from the process fluid and allows it to be removed without stopping the process.

Selecting the thermowell — material, immersion length, stem shape (tapered, straight or stepped) — is just as important as selecting the sensor. A poorly sized thermowell can vibrate in resonance with the fluid (Von Kármán effect) and fracture in service.

In summary

The choice between RTD and thermocouple comes down to two questions:

  • Does the temperature exceed 600°C, or do I need fast response? → Thermocouple
  • Do I need accuracy, long-term stability and a range up to 600°C? → RTD (PT100)

In most medium-temperature industrial processes — water, steam, process fluids, heat exchangers — the PT100 with a field transmitter is the right choice.

At G-MAR we specify and supply temperature sensors (RTDs and thermocouples), transmitters and thermowells for industrial processes. If you have questions about which technology applies to your process, write to us.

You may also be interested in: industrial temperature sensors, industrial instrumentation services, brands we represent and instrumentation by industry.