Ultrasonic Flowmeters

Ultrasonic flowmeters for non-intrusive flow measurement in liquids using Transit Time and Doppler technologies. They allow external clamp-on installation without interrupting the process or cutting the pipe, ideal for clean water, slurries, sludge and corrosive fluids. They support diameters from DN15 to over DN1200 with no pressure drop.

About this category

Ultrasonic Flowmeters: High-Precision Non-Intrusive Measurement

Ultrasonic flowmeters are one of the most versatile and innovative flow measurement technologies on the industrial market. Because they rely on the transmission of acoustic waves, they can quantify liquid flow with full accuracy without placing any obstructive elements inside the pipe. This completely eliminates hydraulic pressure loss and minimizes instrument wear.


Operating Principle and Technologies

Our ultrasonic meters operate under two specific physical principles depending on the characteristics of the process fluid:

  • Transit Time Mode: Two externally mounted transducers alternately transmit and receive acoustic signals. By comparing the difference in transit time of the waves traveling with and against the flow, the system calculates the fluid velocity with high accuracy. It is used mainly in clean liquids.
  • Doppler Mode: Aimed at fluids containing solid particles or suspended gas bubbles. The emitted ultrasonic waves are reflected by these moving impurities; the resulting change in the frequency of the reflected signal (Doppler effect) is used to determine the flow velocity.

Advantages of External (Clamp-On) Mounting

  • Installation Without Interruption: The clamp-on system lets you fix the sensors to the outside of the pipe without stopping production, cutting the piping or drilling the line.
  • Zero Pressure Loss: Since no intrusive sensors are required, it creates no flow resistance or pressure drop in the system.
  • Simplified Maintenance: With no direct contact with aggressive chemicals, sludge or sand, sensor wear is nil, drastically reducing technical interventions.
  • Diameter Versatility: A single transducer kit can be reconfigured to measure different pipe diameters.

Technical Specifications and Process Conditions

Measurement Capabilities and Performance

  • Pipe Diameter Range: Standard coverage from DN15 to DN600 for clamp-on models. Special adaptations are available for large conduits of up to DN1200 or larger on project request.
  • Operating Velocity in the Pipe: From a minimum of 0.03 m/s up to 12 m/s.
  • System Accuracy: Typical accuracy of $\pm1%$ of reading under stable operating conditions.
  • Repeatability: Outstanding performance and measurement consistency thanks to its solid-state design with no moving parts.

Operating and Protection Limits

  • Fluid Temperature: Standard operating range from $-25^\circ\text{C}$ to $70^\circ\text{C}$ (subject to the selected model and technology).
  • Operating Pressure: Withstands up to 16 bar as standard in inline systems (with configurations for higher pressures on request).
  • Enclosure Protection Rating: Standard IP67 / NEMA 4X hermetic sealing with an IP68 option for flood-prone areas, wet chambers or outdoor use.
  • Certification: Versions certified for Hazardous Areas (Ex) are available depending on the application model.

Materials and Industrial Connectivity

Pipe Compatibility

Our solutions are compatible with a wide range of sound-conducting pipe materials:

  • Stainless steel
  • PVC
  • Cast iron
  • Other corrosion- and abrasion-resistant materials

Mounting Modes

  • Clamp-On (External): Mounting with no direct contact for diameters from DN15 to DN600.
  • Inline: Flanged versions or versions with mechanical adapters per international ANSI, DIN or JIS standards.

Signal Integration (PLC / SCADA)

Electronic transmitters ready for automation and distributed control (DCS) networks:

  • 4-20 mA analog output
  • RS-485 (Modbus) digital communication and HART protocol
  • Configurable Pulse output

Compatible Fluid Types

  • Clean Liquids (Transit Time): Potable water, treated process water, industrial solvents and light oils.
  • Liquids with Solids or Aeration (Doppler): Wastewater, mining slurries, industrial effluents, sludge and mixtures with suspended bubbles.
  • Highly Viscous Fluids: Heavy oils, dense sludge and high-viscosity chemicals (subject to process conditions and sensor technology).

Typical Plant Applications

  1. Energy Audits and Diagnostics: Temporary, portable measurement on existing pipes for water balances, plant commissioning or pump curve validation without interrupting the flow.
  2. Large-Diameter Measurement: Control of main consumption and balancing by area in mains from DN200 to DN1200, avoiding costly modifications to the pipe infrastructure.
  3. Cooling Circuits: Monitoring of recirculation flow in closed loops and industrial cooling towers to ensure heat transfer.
  4. Abrasive or Aggressive Chemical Fluids: Measurement in corrosive effluents, slurries or chemicals with bubbles where conventional intrusive sensors would suffer accelerated mechanical wear.
  5. Auxiliary Services and Recirculation: Flow control in washing, filtration and general service lines that require low maintenance.

There are no products available in this category yet.

View the full catalog