Vortex Flowmeters

High-performance Vortex flowmeters for flow measurement in liquids, gases and steam (saturated and superheated). Highly stable instruments that tolerate extreme temperatures from -200 °C to 500 °C and pressures up to 1500 psig, with low pressure loss and exceptional repeatability for consumption balances and thermal efficiency.

About this category

Vortex Flowmeters: Flow Measurement for Steam, Gases and Liquids

Vortex flowmeters are recognized in industry for their extraordinary robustness and their ability to handle one of the most demanding flow measurement applications in the plant: the control of steam (both saturated and superheated), as well as utility gases and clean liquids or liquids containing fines. Their physical principle makes them the standard technology for boiler energy balances, optimizing consumption and heat recovery.


Operating Principle

The Vortex flowmeter works by detecting swirls or vortices that form naturally when the flow is deliberately obstructed. The instrument has a static component called a bluff body (or obstacle) installed across the pipe.

As the fluid passes this body, alternating vortices are generated on each side. The frequency at which these vortices form is directly proportional to the fluid velocity in the line. A highly sensitive piezoelectric sensor registers the pressure fluctuations caused by these vortices and converts them into electrical signals that the transmitter processes to accurately calculate the volumetric flow and, depending on the instrument's configuration, the mass flow in the line.


Main Advantages of the Vortex Flow Meter

  • Advanced Steam Measurement: The most reliable technology for controlling saturated and superheated steam, tolerating extreme thermal shock.
  • Low Pressure Loss: Its design creates minimal restriction to the fluid, which means lower energy consumption in pumping and compression systems.
  • High Operational Availability: With no moving parts exposed to direct mechanical wear, it substantially reduces preventive maintenance costs and plant downtime.
  • Fluid Versatility: A single physical principle is suitable for measuring low-viscosity liquids, compressed air, inert or process gases, and utility steam.

Technical Specifications and Process Conditions

Measuring Ranges and Accuracy

  • Pipe Diameters: Standard coverage from DN15 to DN300 (with special designs for large diameters available on technical project request).
  • Typical Operating Accuracy: Accuracy margin between $\pm1%$ and $\pm2%$ of reading, subject to the line's operating conditions.
  • Flow Range: Continuous, stable measurement from $0.1\text{ m}^3\text{/h}$ to thousands of cubic meters per hour.
  • Flow Velocity in the Pipe: Wide operating range from $0.3\text{ m/s}$ to $30\text{ m/s}$ depending on the nominal piping diameter.

Extreme Operating Conditions

  • Fluid Temperature: Withstands extreme cryogenic and thermal temperature ranges from $-200^\circ\text{C}$ to $500^\circ\text{C}$.
  • Maximum Operating Pressure: High-strength structural design to operate safely at pressures of up to 1500 psig.

Materials and Industrial Connectivity

Manufacturing Materials

  • Body and Sensors: Made as standard of SUS316 Stainless Steel with high chemical and thermal resistance, with Hastelloy or Carbon Steel options for specific applications.
  • Process Connections: Flange couplings per international ANSI, JIS or DIN standards.
  • Mounting Flexibility: Electronics available in compact local mounting or remote configuration to protect the transmitter from severe radiant heat.

Signals and Integration (PLC / SCADA)

Equipped with advanced digital transmitters ready for plant automation:

  • Traditional 4-20 mA analog output.
  • Pulse or Frequency output for fast loop control.
  • Native RS-485 / Modbus and HART communication protocols.
  • Environmental Protection: IP67 / NEMA 4X ingress rating with certified options for operation in hazardous areas under ATEX, IECEx or FM standards.

Typical Plant Applications

  1. Steam Distribution Networks: Measurement of utility steam for consumption balancing at main headers, distribution branches and end-use points across the plant.
  2. Equipment Thermal Efficiency: Steam flow control to heat exchangers, heaters and direct injection lines for energy efficiency audits.
  3. Air and Utility Gas Monitoring: Measurement of instrument air, process air and auxiliary plant gases.
  4. Cooling and Industrial Water: Flow control in process water networks, discharge lines, returns and closed circuits associated with cooling towers.
  5. Condensate Recovery: Measurement of hot condensate returns to optimize the boiler feedwater cycle.
  6. Fluids Containing Fines: Measurement in processes involving water with suspended particles or variable quality, where a robust solution that does not suffer from clogging is required.

There are no products available in this category yet.

View the full catalog