Electromagnetic Flowmeter with Remote Sensor
Electromagnetic Flowmeters

Electromagnetic Flowmeter with Remote Sensor

Electromagnetic flowmeter with a remote sensor configuration for accurate flow measurement in large diameters and severe operating conditions. Built with a robust flanged or Wafer-type body, it is ideal for installation in flood-prone areas, underground chambers or high-vibration environments, keeping the electronics protected.

Product description

Features and specifications

Electromagnetic flowmeter with a remote sensor configuration for accurate flow measurement in large diameters and severe operating conditions. Built with a robust flanged or Wafer-type body, it is ideal for installation in flood-prone areas, underground chambers or high-vibration environments, keeping the electronics protected.

Electromagnetic Flowmeter with Remote Sensor

The electromagnetic flowmeter with remote sensor is the optimal engineering solution for flow measurement at hard-to-reach points, in extreme environmental conditions or on large-diameter pipelines. This configuration physically separates the sensor tube (installed directly in the process line) from the transmitter with electronic display, connecting them through a shielded signal cable.

By keeping the electronics in a control room or a protected cabinet, the instrument's operational continuity is safeguarded against radiant heat, severe piping vibration or real risk of sensor flooding.


Advantages of the Remote Configuration

  • Suitable for Flood-Prone Areas (IP68): The remote sensor can be configured with a permanent hermetic seal, allowing fully submerged operation in underground chambers or extreme outdoor exposure.
  • Operating and Reading Safety: Lets the operator read flow data and configure the instrument at floor level or from safe areas, away from elevated pipes or hazardous fluids.
  • High-Vibration Resistance: Removing the electronics from the tube body eliminates the common failures caused by constant mechanical vibration at pumping stations.
  • Mounting Versatility: Available in large-scale flanged connections as well as compact, lightweight Wafer (between-flange) designs that ease installation on suspended lines.

Technical Specifications and Process Conditions

Sensor and Measurement Capabilities

  • Available Diameter Range: From compact sizes up to large hydraulic mains for large-scale measurement (DN20 to DN1100 or larger).
  • Industrial Accuracy: From $\pm0.5%$ up to high-accuracy options of $\pm0.2%$ of reading, ensuring reliable operational balances.
  • Minimum Required Conductivity: $\ge5 \ \mu\text{S/cm}$ for process and industrial fluids.

Thermal Limits and Protection

  • Process Temperature: Extended operating range from $-20^\circ\text{C}$ to $120^\circ\text{C}$ in the fluid.
  • Protection Rating (Sensor): Standard IP67 sealing with a certified IP68 option for continuous immersion.
  • Cable Distance: Supports stable signal transmission between the sensor and the converter over extended distances (depending on fluid conductivity).

Robust Construction Materials

Designed to withstand chemical and mechanical attack in industrial environments:

  • Outer Body: Coated carbon steel or stainless steel with integrated lifting lugs for safe handling and installation of heavy units.
  • Internal Lining (Liner): Rubber (NBR / Neoprene) options with high mechanical resistance to abrasive wear, or PTFE for complete chemical inertness against corrosive fluids.
  • Measuring Electrodes: Configurable in 316L Stainless Steel, Hastelloy, Titanium or Tantalum for maximum fluid compatibility.

Remote Integration and Communications

The remote transmitter (wall- or rail-mounted) processes the signal induced at the electrodes and converts it into standard control variables for PLC, DCS or SCADA systems:

  • Control Outputs: 4-20 mA analog, empty-pipe alarm outputs and configurable pulses for volumetric totalization.
  • Available Protocols: RS-485 / Modbus and HART connectivity.

Typical High-Demand Applications

  1. Underground Chambers and Inspection Pits: Drinking-water pipelines and municipal distribution networks where meters sit below ground level and are exposed to temporary or permanent flooding.
  2. High-Elevation or Hard-to-Access Lines: Elevated industrial pipes or process racks where servicing the converter on site would be complex or dangerous.
  3. Mining and Slurry Transport: Monitoring on heavy-duty process water or diluted tailings discharge lines, where the piping suffers constant structural vibration from high-power pumps.
  4. Industrial Effluents and Heavy Sludge: Measurement on the discharge headers of water treatment plants, where the fluid carries sands, oxides or high-friction suspended solids.
Quote

Request your quote

Electromagnetic Flowmeter with Remote Sensor
Quote request
Electromagnetic Flowmeter with Remote Sensor
Request a quote